MUTOH PJ-2216NXE Guia do Utilizador

Rev.PJ16E-A-00User's GuideGrand-Format Inkjet PrinterPJ-1614NXEPJ-2216NXERead This Manual Before Using TheEquipment.

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 9 MUTOH INDUSTRIES LTD. 8. Open the clip in front of the print head cap. 21

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-18CAUTION•••• When performing the following work, always perform work with 2 people.••••

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-193. Insert the fixed flange into the roll media. Note that the media end is on the left

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-206. Tighten the screw of the movable flange to fix the roll media to the scroller.7. Hol

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-213.6.2 Loading roll media (PJ-1614NXE) The procedure for loading roll media is explained

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-22NOTE• In the following conditions, follow "4.4 Menu setup on the operation panel&q

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-23CAUTION•••• Be careful not to pinch your fingers when opening and closing the front cov

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-248. Rewind the roll media a little by the scroller while holding the edge of the media,

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-25• To move the scroller to the leftRotate the scroller adjustment screw clockwise.TIP Wh

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-2610. Close the front cover.CAUTION•••• Be careful not to pinch your fingers when opening

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-27NOTE• The following roll media can be attached to the scroller supplied with this unit.

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 10 MUTOH INDUSTRIES LTD. 11. After confirming the installation of print head

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-284. Attach the movable flange to the other end of the media to fix the media firmly.5. T

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-293.6.4 Loading roll media (PJ-2216NXE)The procedure for loading roll media is explained

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-30NOTE• In the following conditions, follow "4.4 Menu setup on the operation panel&q

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-316. After passing the roll media through the tension sensor on the back of the unit, pla

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-328. Rewind the roll media a little by the scroller while holding the edge of the media,

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-33TIPWhen using a winding unit, follow "3.6.5 Setting winding unit" and set the

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-34 • The media initial menu is displayed on the control panel.TIP• When changing the m

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-353. Pull out the roll media from the feed slot, and fix into place with tape so that the

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-365. Set the roll media according to the following procedures:• 3.6.2 Loading roll media

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-373. Press the [ENTER] key on the operation panel.• The media type is set.• The printer s

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 11 MUTOH INDUSTRIES LTD. 21 No. Name 1 Front cover 2 Maintenance cove

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-38

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-393.7 Head cleaning before printingBefore printing, perform purge and head cleaning to cl

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-40• The settings are confirmed.• The unit will start the purge process.TIP• In the purge

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-418. Using the attached print head wiper, lightly wipe off the ink accumulated on the pri

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-423.8 TestprintingFollow the steps below to do a testprinting and confirm that your print

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-433.8.1 Setup ListUse this function to check the current status of the printer.NOTEPlease

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-443.8.2 NozzleCheckUse this function to check if there is any clogging of nozzles, missin

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-453.8.3 AlignmentUse this function to adjust the print quality for best results.NOTEThe p

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-464. Press either the [F2] key or [F4] key to select the number for the line you choose i

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-473.8.5 Maintenance recordUse this function to check the life cycles of the parts of the

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 12 MUTOH INDUSTRIES LTD. 3.5 Refilling the ink – Jet wash fluid p.3-13−p.3-14:

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-48

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-493.9 Connecting the printer to your PCHow to connect the printer to your PC.3.9.1 System

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-503.9.3 Connecting the interface cableThe procedure for connecting the interface cable is

4 HANDLING THEPRINTER4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14.2 Drawing flow . . . . . . . . . . . . . .

4.4.28 Layout setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . 4-254.4.29 Joint printing menu . . . . . . . . . . . . . . . . . . .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-14 Handling the printer4.1 IntroductionThis chapter explains how to handle the printer.

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-2NOTEDo not open the front cover during printing. Doing so may stop drawing with the pr

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-34.3 Using mediaThis section describes details on media available for the printer.4.3.1

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-4NOTE• Use the recommended medias in an appropriate environment.Following are the tempe

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-5(1) PJ-1614NXE(2) PJ-2216NXETIP• Printing margin C of the media feed direction is pres

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 13 MUTOH INDUSTRIES LTD. b) When refilling the jet wash fluid: Using the han

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-6NOTE• Among the following items, if following problems occurred, those may not be warr

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-74.3.6 Media feed compensationDepending on thickness of media, media feed amount will c

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-84. When printing by media feed compensation is finished, the operation panel shifts to

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-94.4 Menu setup on the operation panelThis section describes how to make the Menu setti

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-10NOTE• Network menu is displayed when the network interface board (option) is installe

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-11TIP• By using the software server RIP (option), some setups for printing can be set b

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-12TIP• The origin setup menu automatically ends after none of keys are pressed for a ce

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-134.4.4 Media setup menuPerform various settings for media.4.4.5 Media type menuSet med

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-144.4.6 User media menuMakes various settings on user define media.In the User media me

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-15NOTE• When medias other than the recommended medias are used (user media), the follow

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 14 MUTOH INDUSTRIES LTD. 3.6.1 Attaching roll media (PJ-1614NXE) p.3-19: Modif

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-164.4.7 InkDry menuSet waiting period from the end of operation to the start of next pr

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-174.4.10Thickness menuSet media thickness.4.4.11Platen heater menuSet platen heater tem

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-184.4.12Dryer menuSet InkDryer temperature of during printing.4.4.13Media feed compensa

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-194.4.14Change media feed compensation value menuChange media feed compensation value.4

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-204.4.16Media cut menuSet media cut method after printing.4.4.17Printing mode menuPerfo

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-214.4.18Printing mode setup menuPerform various settings for Printing mode.For each set

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-224.4.20InterLace Setup menuSet InterLace for printing.4.4.21Printing direction menuSet

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-234.4.23Repeat times menuSet repeat times of printing with one printing data.4.4.24Inte

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-244.4.25Command setup menuPerform various settings for printer commands.4.4.26Image res

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-254.4.27Online time out menuSet time from the moment of receiving termination of printi

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 15 MUTOH INDUSTRIES LTD. 4. Insert the flange until the right end meets the

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-264.4.29Joint printing menuSet joint printing.4.4.30Joint margin menuIn the joint print

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-274.4.31Function setup menuPerform various settings for processing of printing data.4.4

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-284.4.33Mirror menuSet this to print reversed printing data.4.4.34Roll Media setup menu

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-294.4.35Roll media length menuSet roll media length.4.4.36Centronics menuSet communicat

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-304.4.37Network menuSet IP address for network interface. Set this when products are us

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-314.4.39ErrorDisplay menuSet display method to the operation panel when minor error occ

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-32TIP• When setup value is changed from "OFF" to "ON" in the media

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-334.4.42Take-up mechanism menuSet take-up mechanism operation during printing.4.4.43Neg

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-344.4.45Write mode menuSet writing method of printing data to the hard disk and printin

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-354.4.46Re-plot menuSet following items when you want to draw printing data saved in th

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 16 MUTOH INDUSTRIES LTD. 3.6.2 Loading roll media (PJ-1614NXE) p.3-23: Modify

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-364.4.47File delete menuSet this when you delete printing data saved in the hard disk.N

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-374.4.48Re-name menuChange file name for printing data saved in the hard disk.NOTE• Re-

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-384.4.49Format menuPerform formatting of the hard disk.NOTE• File name change menu can

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-394.4.50Initialize setup menuReturns parameters to the factory setting.Setup items Para

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-404.4.51All Initialize menuAll setup values are set to the setup value (initial value)

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-414.4.52Media setup Initialize menuSetup values of Media setup menu are set to the set

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-424.4.55Layout Setup Initialize menuSetup values of Layout Setup menu are set to the se

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-434.4.57Roll media setup Initialize menuSetup values of Roll Media setup menu are set t

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-444.4.60Utility Initialize menuSetup values of Utility menu are set to the setup value

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-454.4.63Long-term storage cleaning menuPerform process for Long-term storage cleaning.T

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 17 MUTOH INDUSTRIES LTD. 12 No. Name 1 Scroller 2 Media loading positi

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-46Setup items Parameters DescriptionsLong-term storage cleaning (1/2)No Does not perfor

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-474.5 Operating from the operation panelThis section describes functions operated on th

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-48NOTE• You can also switch the up and down of the pressurizing roller using the foot s

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-493. Press the [F1] key or the [F2] key on the control panel• The unit will perform the

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-504. Perform head cleaning according to "3.7 Head cleaning before printing".T

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-515. After head cleaning, perform nozzle check printing again, and check the condition

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-524.6 Operations after printingThe operations performed after printing is described her

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-533. Place a razor blade on the media cut groove on the platen, and cut the roll media.

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-54The unit enters the normal status6. Cutting of the roll media is ended.(2) When "

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-55CAUTION•••• When cutting the roll media, be careful of the following. Incorrect handl

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 18 MUTOH INDUSTRIES LTD. b) The gap from the media loading position to the r

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-56(1) Time of DisposalDispose of waste fluids during the following conditions:a) After

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 4 Handling the printer4-575. Dispose of the waste fluid as an industrial waste product.No. Name1 Waste fluid va

4 Handling the printer PJ-1614NXE PJ-2216NXE OPERATION MANUAL4-58

5 MAINTENANCE5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15.2 Replacing consumables . . . . . . . . . . . . .

<Memo>

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-15 Maintenance5.1 IntroductionThis chapter explains daily maintenance of the printer.5.2 Replaci

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-2NOTE• When the ink runs out or is close to being empty, the color of the ink that needs refilli

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-35.2.2 Replacing roll mediaRead the following for information on when and how to replace roll me

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-43. With holding the scroller, wind the roll media manually.4. Remove the scroller from the prin

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-55. Loosen the screw of the movable flange.6. While holding the roll media, remove the movable f

April 2002 PJ16E-A-00d 1 MUTOH INDUSTRIES LTD. Some contents of the Operation Manual are changed. Make sure the following list shown below. Page Ite

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 19 MUTOH INDUSTRIES LTD. 3.6.3 Attaching roll media (PJ-2216NXE) p.3-27: Modif

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-67. Remove the roll media from the scroller.8. Follow the steps below to install another roll me

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-7CAUTIONBe sure not to pinch your fingers while opening and closing the front cover.2. Open the

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-85. Loosen the screw of the movable flange.6. While holding the roll media ,remove the movable f

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-97. Remove the roll media from the scroller.8. Follow the steps below to install another roll me

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-10(3) Replacement procedureFollow the procedures below to replace the ink filter.CAUTION•••• Whe

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-114. Loosen the two screws for the ink filter cover, and remove the ink filter to be exchanged.N

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-125.3 Cleaning the printerYou need to clean the printer periodically to keep it in best working

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-135.3.2 Cleaning inside the printer(1) Cleaning intervalClean once a month.(2) Cleaning Procedur

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-14NOTEDo not blow off media dust inside the printer using an air dusting machine. Doing so may c

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-15CAUTION•••• When cleaning the waste fluid tray, always wear the protective glove supplied with

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 20 MUTOH INDUSTRIES LTD. 3.6.5 Setting winding unit p.3-34: Add NOTENOTE in fr

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-16CAUTION•••• When opening and closing the front cover and maintenance cover, be careful not to

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-173. Close the front cover and the maintenance cover.• Close each cover firmly until they are fi

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-185.4 Long-term storage cleaningThe period for performing cleaning for long-term storage, and it

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-194. Press the [F1] key - [F4] keys to select the print head to perform the long-term storage cl

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-208. The printer starts the print head cleaning.• The print head is cleaned by the jet wash liqu

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-2114. Turn the unit power OFF.15. Reattach the valve cover.16. The long-term storage cleaning tr

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-225.5 Transfer and transportationThis section explains transferring and transporting the printer

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 5 Maintenance5-23(2) After the transferFollow the steps below to prepare the printer to be used after the trans

5 Maintenance PJ-1614NXE PJ-2216NXE OPERATION MANUAL5-24TIPTo perform the nozzle check, refer to "3.8.2 NozzleCheck".5. Perform a fine adjus

6 TROUBLESHOOTING6.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16.2 Failures and malfunctions of the printer .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 21 MUTOH INDUSTRIES LTD. 3.6.6 Setting media type p.3-36−p.3-37: Modify Step 2

<Memo>

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-16 Troubleshooting6.1 IntroductionThis chapter explains troubles that may occur when using t

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-2(3) The printer does not work after data is sent from a computer.(4) The printer does not p

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-3(6) printing position is not correct (some position is not printed.)(7) media jams occur fr

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-4(10) Ink is not used though you performed initial ink charge.(11) The media is off or damag

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-5(12) Media is damaged during media Initial.NOTERemove the jammed or damaged media, referrin

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-6(15) Media is fed crooked while printing.(16) The printer is not connected to a computer us

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-7(18) White or black lines appear on printouts.(19) Lines are missing on printouts.No. Possi

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-86.3 Error messagesThis chapter explains the messages displayed on the operation panel both

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-96.3.2 Message type error display and solutionsThe following are the message type error disp

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 22 MUTOH INDUSTRIES LTD. 3.7 Head cleaning before printing p.3-41: Modify the

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-10(2) Error messages regarding warnings of the remaining inkThe following error message is d

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-11TIP• The [*] of the error will display shows the color of the ink causing the error accord

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-126.3.4 Command error display and solutionsFollowing are command error descriptions and thei

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-13NOTE• *** in error messages are code numbers indicating what kind of error occurred.• [ ]

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-146.4 When media jams occurIf the loaded media is jammed in the printer, follow the steps be

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-153. If a piece of media or media dust are in the printer, open the front cover and remove t

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-16NOTE• When raising or lowering the pressurizing roller, you can use the foot switch instea

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 6 Troubleshooting6-174. If a reboot requiring error occurs, turn off the printer using the [POWER] key on the o

6 Troubleshooting PJ-1614NXE PJ-2216NXE OPERATION MANUAL6-18

7 APPENDIX7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17.2 Product Specifications . . . . . . . . . . . . . .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 23 MUTOH INDUSTRIES LTD. 10. Put the purge plate on the purge stand. 121 No.

<Memo>

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 7 Appendix7-17 Appendix7.1 IntroductionThis section explains the specifications, optional parts and supplies, i

7 Appendix PJ-1614NXE PJ-2216NXE OPERATION MANUAL7-27.2.2 PJ-2216NXE Unit specificationsEnvironmental conditionsOperation environmentTemperature: 18°C

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 7 Appendix7-3Head life 10 billion dots or more per nozzle(in case of the sequence discharging under the conditi

7 Appendix PJ-1614NXE PJ-2216NXE OPERATION MANUAL7-47.3 Interface SpecificationsThis section explains the specifications for the interfaces supported

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 7 Appendix7-5(3) Recommended centronics cable specifications7.3.2 Network Interface (Optional) Specifications12

7 Appendix PJ-1614NXE PJ-2216NXE OPERATION MANUAL7-67.4 Options/Supply list7.4.1 Options(1) Interface cable(2) Network interface(3) Hard Disk(4) Scro

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 7 Appendix7-7(2) Roll mediaNOTEFor more information about the recommended media, contact MUTOH local leader.(3)

7 Appendix PJ-1614NXE PJ-2216NXE OPERATION MANUAL7-87.5 Installing OptionsWhen installing optional parts purchased with your printer, refer to the pr

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 7 Appendix7-92. Insert the hard disk into the hard disk expansion slot of the board.• Match the cut out section

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 24 MUTOH INDUSTRIES LTD. 3.8.3 Alignment p.3-44−p.3-45: Modify the procedures

7 Appendix PJ-1614NXE PJ-2216NXE OPERATION MANUAL7-107.5.2 Installing network interface boardInstalling a network interface board in this unit will al

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 7 Appendix7-114. Insert the network interface board into the network interface expansion slot of the board.• Ma

7 Appendix PJ-1614NXE PJ-2216NXE OPERATION MANUAL7-127.6 GlossaryThis manual includes words that are used with meanings that are different from their

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 7 Appendix7-13 J L O M Initial values Values set when the printer leaves the factoryInitialization routineOp

7 Appendix PJ-1614NXE PJ-2216NXE OPERATION MANUAL7-14 N P R S U Network Printer Printer connected to the computer via a networkPlug and play Funct

PJ-1614NXE PJ-2216NXE OPERATION MANUAL IndexIndex-1Index A AC inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3, 2-4Adapter . . .

Index PJ-1614NXE PJ-2216NXE OPERATION MANUALIndex-2Interface cable . . . . . . . . . . . . . . . . . . . . . . 3-50, 7-6Interface connector . . . .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL IndexIndex-3Recommended media . . . . . . . . . . . . . . . . . . . . . 4-3Refilling the ink - jet wash fluid

Index PJ-1614NXE PJ-2216NXE OPERATION MANUALIndex-4

ContentsCheckCheck the contents of the packageRemove the packing materialsPlacing the main unit horizontallyInsure that there is no scratch or scar on

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 25 MUTOH INDUSTRIES LTD. 4.3.7 Installing media holder plate If you use any me

Operation Panel TableNo. Name Normal Setup menu display1[POWER] keyTurns the printer on and off. Turns the printer on and off.2 [F1] key Executes the

PJ-1614NXE PJ-2216NXE Operation Manual Setup Menu Configuration Diagram<Memo>

Setup Menu Configuration Diagram PJ-1614NXE PJ-2216NXE Operation ManualSetup Menu Configuration DiagramFor Setup menu configuration diagram, refer to

PJ-1614NXE PJ-2216NXE Operation Manual Setup Menu Configuration Diagram

Setup Menu Configuration Diagram PJ-1614NXE PJ-2216NXE Operation Manual

MUTOH INDUSTRIES LTD.Tel.:81-(0)3-5486-7145Fax:81-(0)3-5486-7163E-mail:[email protected]://www.mutoh.co.jpMUTOH AMERICA INC.Tel.:1-602-4144613Fax:1-

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 26 MUTOH INDUSTRIES LTD. 12312213 No. Name 1 Roll media 2 Media holde

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 27 MUTOH INDUSTRIES LTD. 4.4.1 Setup menu p.4-11: Modify the descriptions as f

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 28 MUTOH INDUSTRIES LTD. 4.4.2 Origin setup menu p.4-12: Modify the descriptio

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 2 MUTOH INDUSTRIES LTD. Page Item Description p.3-34−p.3-35 Modify the foll

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 29 MUTOH INDUSTRIES LTD. 4.4.5 Media type menu p.4-14: Modify the descriptions

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 30 MUTOH INDUSTRIES LTD. 4.4.6 User media menu p.4-15: Modify the descriptions

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 31 MUTOH INDUSTRIES LTD. 4.4.38 Utility menu p.4-30−p.4-31: Modify the descrip

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 32 MUTOH INDUSTRIES LTD. 4.4.64 Winding Unit Menu Sets the winding operation o

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 33 MUTOH INDUSTRIES LTD. 4.4.65 Send Roll menu Set the feed unit operation f

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 34 MUTOH INDUSTRIES LTD. 4.4.66 Maintenance record menu Check the parts‘ life

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 35 MUTOH INDUSTRIES LTD. 1. Dummy link anchor Setup items Parameters Descri

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 36 MUTOH INDUSTRIES LTD. 4.5.3 Winding the roll media p.4-48−p.4-49: Modify St

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 37 MUTOH INDUSTRIES LTD. 5.2.3 Replacement of the ink filter (1) Replacement i

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 38 MUTOH INDUSTRIES LTD. 5.2.4 Replacement of the print head and CR motor Th

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 3 MUTOH INDUSTRIES LTD. Page Item Description p.4-33 Add NOTENOTE to “4.4.43

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 39 MUTOH INDUSTRIES LTD. 

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 40 MUTOH INDUSTRIES LTD. 5.4 Long term storage cleaning p.5-18−p.5-20: Modify

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 41 MUTOH INDUSTRIES LTD. 8. Switch the 3-way valve to the jetwash fluid side

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 42 MUTOH INDUSTRIES LTD. 

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 43 MUTOH INDUSTRIES LTD. 6.3.1 Status messages (1) Displays of the operationa

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 44 MUTOH INDUSTRIES LTD. <MEMO>

ContentsCheckCheck the contents of the packageRemove the packing materialsPlacing the main unit horizontallyInsure that there is no scratch or scar on

Important Notice(1)Important NoticeThis product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 4 MUTOH INDUSTRIES LTD. Page Item Description p.4-49 Modify the following i

Warranty Limitations(2)Warranty Limitations1. MUTOH INDUSTRIES LTD. warrants part repair or replacement as a sole measure only if a failure is found i

About This Manual(3)About This Manual1. Purpose and target readersThis manual explains preparations needed before using and procedures for operations

About This Manual(4)3. Manual notationThe following symbols are used in this manual for easier understanding of the information.Symbol MeaningMust be

PJ-1614NXE PJ-2216NXE OPERATION MANUAL(5)GENERAL TABLE OF CONTENTS1 Safety Instructions1.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL(6)3.6.2 Loading roll media (PJ-1614NXE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-

PJ-1614NXE PJ-2216NXE OPERATION MANUAL(7)4.4.18 Printing mode setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL(8)4.6 Operations after printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

PJ-1614NXE PJ-2216NXE OPERATION MANUAL(9)7.3 Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PJ-1614NXE PJ-2216NXE OPERATION MANUAL(10)

1 SAFETY INSTRUCTIONS1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11.2 Warnings, Cautions, and Notes. . . . . .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 5 MUTOH INDUSTRIES LTD. 3.4.1 Turning the power ON p.3-8: Modify the procedure

<Memo>

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 1 Safety Instructions1-11 Safety Instructions1.1 IntroductionThis chapter explains the meaning of safety terms

1 Safety Instructions PJ-1614NXE PJ-2216NXE OPERATION MANUAL1-21.3 Important safety instructionsGeneral safety instructions that must be observed to u

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 1 Safety Instructions1-3Be sure to use the specified voltage (AC 100 V- 120 V or AC 220 V - 240 V). Otherwise,

1 Safety Instructions PJ-1614NXE PJ-2216NXE OPERATION MANUAL1-4During printing, do not touch the media guide. The media guide is hot, and may cause bu

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 1 Safety Instructions1-5When performing the following work, always perform work with 2 people.• Placement of th

1 Safety Instructions PJ-1614NXE PJ-2216NXE OPERATION MANUAL1-6Before installation of options, always perform the following.• Turn the power source to

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 1 Safety Instructions1-71.4 Warning labelsThe handling, attachment locations, and types of warning labels are e

1 Safety Instructions PJ-1614NXE PJ-2216NXE OPERATION MANUAL1-8(2) ScrollerNo. Type12No. Type3

2 PRODUCT OVERVIEW2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12.2 Features . . . . . . . . . . . . . . . . .

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 6 MUTOH INDUSTRIES LTD. 10. Keep the print head cap in the accessories box. 1

<Memo>

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 2 Product Overview2-12 Product Overview2.1 IntroductionThis chapter explains the features, part names, and func

2 Product Overview PJ-1614NXE PJ-2216NXE OPERATION MANUAL2-22.3 Part names and functionsPart names and functions are explained below.2.3.1 FrontNo. Na

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 2 Product Overview2-32.3.2 Rear section (PJ-1614NXE)8 Foot switch This switch is used to raise and lower the pr

2 Product Overview PJ-1614NXE PJ-2216NXE OPERATION MANUAL2-42.3.3 Rear section (PJ-2216NXE)5 Hard disk slot The hard disk (optional) attaches here. Wh

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 2 Product Overview2-52.3.4 Operation panelThe operation panel is used to set operational conditions, display th

2 Product Overview PJ-1614NXE PJ-2216NXE OPERATION MANUAL2-6(2) LCD monitor and status lampsNo. Name Normal setup menu display1 [POWER] key Turns the

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 2 Product Overview2-72.4 Printer statusThe status of the printer is explained below.2.4.1 NormalIndicates that

2 Product Overview PJ-1614NXE PJ-2216NXE OPERATION MANUAL2-8TIP• By using the software server RIP, some setups for plotting can be set by the RIP. For

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 2 Product Overview2-9NOTE• See "6.3.1 Status messages" for details of displaying the printer status.

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 7 MUTOH INDUSTRIES LTD. 3.4.2 Turning the power OFF p.3-9−p.3-11 Modify the pr

2 Product Overview PJ-1614NXE PJ-2216NXE OPERATION MANUAL2-10

3 BASIC INSTALLATION3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13.2 Connecting the power cable . . . . . . .

<Memo>

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-13 Basic Installation3.1 IntroductionThe procedures needed before using the printer are e

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-2NOTEWhen the control panel is in the following condition, the power is ON.• [POWER] key

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-3WARNING•••• Do not attempt to plug in electrical plugs with wet hands. Doing so may resu

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-4No. Name1 Power cable

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-53.3 Connecting the foot switchThe connection procedure for the foot switch is describe

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-6No. Name1 Foot switch1

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-73.4 Turning the power ON/OFFThe method to turn the power ON or OFF are described below.3

PJ-1614NXE PJ-2216NXE OPERATION MANUAL ERRATA April 2002 PJ16E-A-00d 8 MUTOH INDUSTRIES LTD. 6. Open the front cover and the maintenance cover. C

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-83. Close the front cover and the maintenance cover.• Close each cover firmly until they

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-9NOTE• If there are any problems during the initial startup operation, the unit will disp

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-105. Impregnate the jet wash liquid sufficiently into the sponge of the print head cap.6.

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-117. Close the maintenance cover.• Close firmly until the cover is fixed into place.No. N

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-123.5 Refilling the ink - jet wash fluidThe refilling of the ink and jet wash fluids are

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-13TIP• During the factory shipping inspection, in order to perform verification of printi

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-14NOTEThe color of the ink to fill in the main tank is labeled on the tank tray according

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-155. After filling 1 tank of ink, fill the next color main tank.6. After filling all main

3 Basic Installation PJ-1614NXE PJ-2216NXE OPERATION MANUAL3-16NOTEDuring ink replenishment, note the following.• Do not turn the printer off.• Do not

PJ-1614NXE PJ-2216NXE OPERATION MANUAL 3 Basic Installation3-173.6 Media handlingThe following describes the procedures for installing and setting rol