MUTOH Rockhopper II Series Guia do Utilizador descarregar pdf (Página 28)

Handling Roll Media – User’s Guide

AP-75100, Rev.2.0, 26/11/04

3.2.2. Assembling the winder 30 (for 87”)

Assemble the product according to the following procedure.

Step 1 : Install the winder 30 motorized unit to the stand according to the following procedure.

A ) : Attach the winder 30 bracket to the left side of the winder 30 motorized unit.

B ) : Tighten the four flat head screws (M4x5) to install the winder 30 bracket.

1. Winder 30 bracket 3. Flat head screws (M4x5)

2. Winder 30 motorized unit

C ) : Attach the winder 30 bracket to the right side of the stand.

D ) : Using the attached hexagon wrench (diagonal diameter 3 mm); tighten the four hexagon

socket head cap screws (M4x10) to install the winder 30 bracket.

1. Winder 30 bracket 2. Stand

3. Hexagon socket head cap screw (M4x10)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 94 95

Sem comentários

MUTOH Rockhopper II Series Guia do Utilizador Página 28