MUTOH Rockhopper II Series Especificações descarregar pdf (Página 228)

Rockhopper II series printers – Maintenance Manual

229

AP-74065, Rev. 1.2, 27/09/04

Step 5 : Loosen the screw with 1 turn, which secures the Head Fixing Plate.

No. Part

1 Head Fixing plate securing screw

2 Front/Back Adjustment Screw

Step 6 : When the nozzles are not in one row, adjust the head front/back position by moving the Head

Front/Back Adjustment Screw the manner shown below. First adjust nozzle row A (1A, 2A, 3A,

4A). When adjusted perfectly, nozzle row B should automatically be adjusted. But in practice this

isn’t always a fact. When your determine a small misalignment after adjusting A well, readjust

again until all nozzles of row A and B are perfectly aligned.

NOTE :

We only give an example for one colour combination. Please refer to “Operation

Procedure Labels” in the Maintenance Manual where you can find the other possible

colour combinations.

Step 7 : Tighten the screw which secures the Head Fixing Plate.

Step 8 : Repeat step 1 to 7 until the adjustment is correct.

Notes :

¾ Please note that you also have a third menu in head slant. Notably the check menu.

With this pattern, it is possible to compare every front and back position of every

head to each other

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 318 319

Sem comentários

MUTOH Rockhopper II Series Especificações Página 228